Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Almera Versa
    4. : Nissan Versa headlight bulb replacement

Nissan Almera Versa - Video tutorial

Model: Nissan Almera Versa N17 - Years 2012-2019
Part: Headlight bulb
Operation: Nissan Versa headlight bulb replacement

We see in this video the instructions that will allow us to remove and replace the headlight bulb of the Nissan Versa. First of all, we open the bonnet and begin to disconnect the electrical connector of the headlight bulb; after which we remove the rubber cap protecting the bulb, as shown in the video. At this point we release the metal clip to extract the bulb from the light, replacing it with the new one (in this case the H4 type); insert it in the correct direction and insert it inside the optical group, following the video to the end!


Posted on 11 November 2022 by ScegliAuto



How to replace the headlight bulb of the 2012 Nissan Versa
Nissan Almera Versa (2012-2019 / N17) If you own a 2012 Nissan Versa and want to learn how to correctly replace the front headlight bulb, then all you have to do is read the following gui
Where is the main fuse box of the Nissan Almera Versa 2019
Nissan Almera Versa (2012-2019 / N17) There are two separate fuse boxes in your 2019 Nissan Almera Versa but in this new guide we're going to find out where the main one is located. The l
How to replace the air filter in the Nissan Versa?
Nissan Almera Versa (2012-2019 / N17) As we can see in this tutorial, replacing the air filter in the Nissan Versa is an extremely simple and economical operation. First of all, in order

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos