Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. X Trail
    4. : Where are the fuse boxes located in the Nissan X-Trail and what are the schematics?

Nissan X Trail - Video tutorial

Model: Nissan X Trail MK 3, T32 - Years 2014-2023
Part: Fuse box
Operation: Where are the fuse boxes located in the Nissan X-Trail and what are the schematics?

In this video we can see the position of the fuse boxes, and the respective diagrams, in the Nissan X-Trail, useful in case we need to check the fuse of a malfunctioning device. The first two boxes are both located inside the passenger compartment, behind the side bulkheads of the dashboard. The third and final box is instead located inside the engine compartment, located right next to the battery. Finally, we can find additional fuses in the positive pole. In the event of a damaged fuse, we always use a replacement of the same amperage.


Posted on 2 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • X Trail 2014-2023 - Where is the fuse for the Nissan X-Trail cigarette lighter located? Read Answer
    • X Trail 2001-2006 - Where is the air conditioning fuse on the Nissan X-Trail located? Read Answer
    • X Trail 2001-2006 - Where are the fuses on the Nissan X-Trail located? Read Answer
    • X Trail 2014-2023 - Where is the Nissan X-Trail cabin blower fuse located? Read Answer
    • X Trail 2007-2014 - Where are the fuses located in the Nissan X-Trail? Read Answer
    • X Trail 2001-2006 - Where are the fuses for the exterior lights of the Nissan X-Trail T30? Read Answer
    • X Trail 2014-2023 - Where is the Nissan X Trail brake fuse located? Read Answer
    • X Trail 2007-2014 - Where are the fuses of the Nissan X-trail located? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos