Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Nissan Armada TA60

Model: Nissan Armada Ta60 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Instrument cluster

See other generations:
Video tutorial

This guide shows how to reset the maintenance light on the Nissan Armada TA60. The first step is to enter the vehicle's maintenance menu by pressing the "INFO" button and using the arrows to navigate to the maintenance tab. At this point, you can set the four maintenance reminders.

By selecting the reminder with the arrows and pressing the "OK" button, you can reset the mileage interval and the on-screen alert.

Now, turn off the instrument cluster to complete the reset operation. Check if the operation was successful by accessing the menu again and verifying the status of the reminders.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on the Nissan Armada TA60
How to Replace the Engine Air Filter on the Nissan Armada TA60
Nissan Armada (2004-2015 / Ta60) This guide shows how to replace the fuel filter on the Nissan Armada TA60. The first step is to open the hood and secure the vehicle. At this point, …
How to Remove the Front Door Speaker of the Nissan Armada TA60
How to Remove the Front Door Speaker of the Nissan Armada TA60
Nissan Armada (2004-2015 / Ta60) This guide shows how to remove the front door speaker of the Nissan Armada TA60. First, remove the plastic cover located under the lock handle and ta…
How to Replace the Alternator on a Nissan Armada?
How to Replace the Alternator on a Nissan Armada?
Nissan Armada (2004-2015 / Ta60) To replace the alternator on a Nissan Armada, lift the vehicle with a jack to loosen the bolts securing the right front wheel. Remove the wheel from …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos