Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How do you reset the Nissan Navara Service Light?

Nissan Navara - Video tutorial

Model: Nissan Navara D23 - Years 2014-2023
Part: Checks and maintenance
Operation: How do you reset the Nissan Navara Service Light?

To be able to reset the Nissan Navara's Service warning light, turn on the instrument panel by turning the appropriate key and then press the MENU button located on the left spoke of the steering wheel: press it until the "Settings" menu appears. You can move inside it with the ENTER switch located on the left spoke of the steering wheel: still using the same button, select the "Maniteance" item and then "Oil control system". Pressing the ENTER button once more, a message will appear asking if you really want to confirm the reset: selecting "Yes" the warning light will be reset.


Posted on 21 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - Where is the fuel tank of the Nissan Navara located? Read Answer
    • Navara 2014-2023 - What are the problems with the AdBlue of the Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the AdBlue on the Nissan Navara NP300? Read Answer
    • Navara 2005-2015 - What problems have affected the Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the warning lights on the Nissan Navara? Read Answer
    • Navara 2014-2023 - How much does it cost to replace the courtesy light switches in the Nissan Navarra? Read Answer
    • Navara 2005-2015 - How do I reset the Nissan Navara Service light? Read Answer
    • Navara 2005-2015 - Where is the jack of a Nissan Navara located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos