Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Cabin air filter replacement

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located behind the central tunnel and in order to reach it it is necessary to remove the glove compartment: therefore open the glove compartment door and unscrew the screws along the contour and the one in the center of the upper wall; once the glove box has been removed, it is possible to access the passenger compartment air filter housing and extract it, remove any residual dirt present inside the housing itself and install the new filter (it is advisable to choose the activated carbon filter) orienting it according to the direction of the air flow indicated by the arrows.


Posted on 27 August 2023 by ScegliAuto



Nissan Micra Cabin Air Filter Replacement
Nissan Micra (2002-2010 / K12) .. Nissan Micra Cabin Air Filter Replacement? To remove the filter, the glovebox must be removed. We open the glove compartment..
Nissan Micra Cabin Air Filter Replacement
Nissan Micra (2002-2010 / K12) In today's video tutorial we will see how to remove and replace the cabin filter of a Nissan Micra second series. First we go inside the car, on the
Cabin air filter replacement
Nissan Micra (2002-2010 / K12) The passenger compartment air filter is located just behind the console of the central tunnel and in order to reach it it is necessary to remove the

Other guides that may interest you

    Frequently Asked Questions

    • Micra 2017-2024 - Where is the cabin filter located on Nissan Micra K14? Read Answer
    • Micra 2010-2017 - How to replace the cabin filter on Nissan Micra K13? Read Answer
    • Micra 1992-2002 - Where is Nissan Micra k11 air conditioning filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos