Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Where is the OBD port located on the 2011 Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Dashboard
Operation: Where is the OBD port located on the 2011 Nissan Qashqai?

If you want to independently locate the OBD port inside your first-generation Nissan Qashqai (year 2011), you just need to follow these simple steps. First, go inside the car and make sure it is turned off. Then, shift your attention to the lower left part of the dashboard and find the small compartment. Once you have found it, completely remove it with your own hands and locate the OBD port you were looking for. At this point, you can finally connect a diagnostic tool to fix any errors and anomalies in the car.


Posted on 11 June 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Qashqai 2014-2022 - What are the warning lights on a Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - What does the engine warning light on Qashqai mean? Read Answer
    • Qashqai 2006-2014 - Nissan Qashqai J10 airbag warning light? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos