Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove Scratches from the Dashboard of a Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Instrument cluster

In this video, learn how to remove scratches from the dashboard of your Nissan Qashqai (this method works for any car). First, adjust the steering wheel all the way towards you and lower it for comfortable access. Also, remove the side cover of the dashboard and the air vent, which is clipped in, as well as the lower part of the dashboard. This will allow you to work properly and remove the transparent cover. It may seem like a big job, but they are just clips. The YouTuber even shows how to bevel a corner to avoid removing the entire centre console (which would otherwise be necessary). Remove the top part of the steering wheel, and now you can take off the instrument panel trims for better access. To clean the transparent plexiglass, you will need specific polish designed for headlights. Once cleaned, simply refit everything, starting with the instrument panel trims and working backwards through the rest.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) To reset the trip odometer of the Nissan Qashqai, turn on the ignition by rotating the key in the ignition switch. Once the instrument panel is on, p…
Nissan Qashqai (2014-2022 / J11) To reset the trip meter on a Nissan Qashqai, first turn on the instrument cluster using the ignition key. Once the cluster is on, locate the TRIP RES…
Nissan Qashqai (2006-2014 / J10) Before starting, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch by unscrewing the relevant bolts and clips. Nex…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - What does the "Service due now" message on the Nissan Qashqai mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos