Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the internal rearview mirror of the Nissan Qashqai?

Model: Nissan Qashqai J12 - Years 2021-2026
Part: Rearview mirror

Today we will see, in this short and simple guide, how to disassemble and remove the internal rearview mirror of the Nissan Qashqai, following these simple steps. First, we get into the car and start removing the plastic cover that we find behind the internal rearview mirror, levering on the sides with something thin; then we disconnect the electrical connector of the sensor and unscrew the screws of the rearview mirror to remove it, as shown in the video. At this point, we install the new rearview mirror, applying the reverse procedure!

Posted on 28 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace wing mirror glass on Nissan Qashqai
How to replace wing mirror glass on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To replace the glass of the Nissan Qashqai external rear view mirror, we start by protecting the plastic of the mirror with adhesive tape, take a pla…
How to replace the rearview mirrors of the Nissan Qashqai J10
How to replace the rearview mirrors of the Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) In this video we can see how it is possible to replace the external rearview mirror of the Nissan Qashqai J10: we start by opening the door, because …
How to replace the glass of the external rearview mirror of the Nissan Qashqai
How to replace the glass of the external rearview mirror of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today's step-by-step instructions will show us how to disassemble and replace the glass of the external rearview mirror of the Nissan Qashqai. First …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos