Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Customize Your Nissan Sunny's Bumper on a Budget

Model: Nissan Sunny N16 - Years: 2000, 2001, 2002, 2003, 2004, 2005
Part: Front bumper

See other generations:
Video tutorial

The method used by our YouTuber to DIY tune the front bumper of his Nissan Sunny is really simple and economical. He obtained an identical bumper, perhaps from a junkyard, and cut the lower part of the bumper itself.

With a lot of creativity, he mounted the cut part upside down on his car's bumper, after cleaning and sanding it well. At this point, he drilled holes in the bumper and the piece he had cut and simply joined the two pieces together.

This way, the dimensions were perfect (it was the same bumper mounted upside down) but it had a much more aggressive look. And the cost was truly minimal.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Repair the Front Bumper and Fender of the Nissan Sunny
How to Repair the Front Bumper and Fender of the Nissan Sunny
Nissan Sunny (2011-2020 / N17) In this video tutorial, you will learn how to repair and replace the front part of the vehicle, which involves the front bumper, frame, fenders, and …
How to Remove the Tail Lights on a Nissan Sunny?
How to Remove the Tail Lights on a Nissan Sunny?
Nissan Sunny (2011-2020 / N17) In this tutorial, you will see how to remove the tail lights on a Nissan Sunny, a very simple task to perform if you need to replace a bulb or the en…
How to Remove the Cabin Fan in the Nissan Sunny?
How to Remove the Cabin Fan in the Nissan Sunny?
Nissan Sunny (2011-2020 / N17) As we can see in this tutorial, removing the cabin fan in the Nissan Sunny is a very simple and quick task. First, disconnect the negative terminal o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos