Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Light on a Nissan Vehicle

Model: Nissan Nissan Various
Part: Warning light – error code

In this video, you will learn how to reset the airbag warning light on any Nissan vehicle: the procedure is the same for all models. Turn the ignition on and then off, but do not start the engine, just the instrument panel. Repeat this five times quickly and in sequence, waiting five seconds between each ignition. After the fifth ignition, if the airbag light has turned off, you can start the engine, and the operation will be complete. To ensure the reset has been successful, turn off the engine again and leave it off for a moment. Upon restarting, the light will briefly illuminate before turning off.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Nissan Various Turn on the ignition (not the engine) by turning the key to the ON position. The airbag light will illuminate immediately and start flashing. When th…
Nissan Nissan Various Below we will see the information regarding the reset of the service light for the regular maintenance of the engine oil change of the Nissan NV. Fir…
Nissan Nissan Various In order to reset the CVT transmission of Nissan vehicles, you need to connect a diagnostic tool to the OBD port of the vehicle: by doing this, it wi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos