Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure of the Nissan Juke?

Model: Nissan Juke MK 1 - Years 2010-2019
Part:

To reset the tyre pressure of the Nissan Juke, start by turning on the car's instrument panel, then start the engine. You will notice the warning light for low tyre pressure. To reset it, after checking the pressure of all four tyres, go to the left side of the steering wheel for left-hand drive vehicles (to the right of the steering wheel for right-hand drive vehicles). Press and hold the button with the flat tyre symbol until the light stops flashing and turns off. At this point, the tyre pressure has been reset, and you can turn off the car.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Nissan Juke?
How do you reset the tire pressure light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The tire pressure warning light that appears on the instrument panel of the Nissan Juke can be reset by inflating the tires to the recommended pressu…
How do you reset the tire pressure light on the Nissan Juke?
How do you reset the tire pressure light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In order to reset the tire pressure warning light of the Nissan Juke, you need to inflate the tires to the recommended pressure level. Once the tires…
How do you reset the tire pressure light on the Nissan Juke?
How do you reset the tire pressure light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) On the instrument panel of the Nissan Juke, the tire pressure warning light that appears can be reset by turning on the instrument panel, inserting t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos