Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator on a Nissan Micra K13

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Alternator

See other generations:
Video tutorial

In this video, you will see how to replace the alternator on a Nissan Micra K13: first, remove the wheel from the passenger side, then move the wheel arch liner to access the auxiliary belt and tensioner, where there is a 13 mm nut to loosen until reaching the pulley.

Here, the presenter shows a diagram of how the poly-V belt is arranged to better understand where to loosen the pulley.

Below, you can see the hole where the alternator is located. The presenter shows what has been removed to understand how it is made.

You can find the part, for example, on Amazon with code B00CVZMRHG, priced at £110.00, including delivery charges. For a more comfortable job, it may be helpful to remove the radiator support, but this is not strictly necessary.

Then reconnect the electrical contact by reversing the process.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Where is the OBD port of the Nissan Micra K13 located?
Where is the OBD port of the Nissan Micra K13 located?
Nissan Micra (2010-2017 / K13) If you want to locate the OBD port inside your Nissan Micra K13, all you have to do is follow the steps described in the following guide. First of al…
How do you replace the spark plugs in the Nissan Micra K13?
How do you replace the spark plugs in the Nissan Micra K13?
Nissan Micra (2010-2017 / K13) The candles of a car, in general and not just the specific vehicle, must be replaced in the long run as they inevitably oxidize or even burn out, so …
How to disassemble the radio panel of the Nissan Micra K13
How to disassemble the radio panel of the Nissan Micra K13
Nissan Micra (2010-2017 / K13) If you need to disassemble the entire protective panel located on the central dashboard of your Nissan Micra K13 by yourself, all you have to do is f…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos