Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the CV Joint from the Nissan Micra

Model: Nissan Micra K11 - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Axle shaft

See other generations:
Video tutorial

To extract the wheel-side CV joint from the driveshaft, it is advisable to use the appropriate tool that allows you to pull it out without risking pushing the joint out from the gearbox side, which would cause oil to leak; therefore, lift the vehicle on a ramp, remove the wheel, the driveshaft nut from the hub, and disconnect the ball joint from the hub support to extract the driveshaft; then slide off the boot and apply the puller by first securing the collar to the driveshaft and then extracting the joint by tightening the nut at the front.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to remove the CV joint from the Nissan Micra?
How to remove the CV joint from the Nissan Micra?
Nissan Micra (1992-2002 / K11) To remove the CV joint from the Nissan Micra, first loosen the bolts securing the wheel corresponding to the joint being replaced and remove it compl…
How to Replace the Front Wishbone on a Nissan Micra K12
How to Replace the Front Wishbone on a Nissan Micra K12
Nissan Micra (2002-2010 / K12) See how to replace the front wishbone on a Nissan Micra K12: lift the car with a jack and place it on axle stands; remove the affected front wheel, u…
How to Replace the Key Battery of a Nissan Micra
How to Replace the Key Battery of a Nissan Micra
Nissan Micra (2002-2010 / K12) Begin by pressing the button located at the bottom of the key of your Nissan Micra. This will free the lower section of the key, which you can then u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos