Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads

Model: Nissan Micra K12 - Years 2002-2010
Part: Brake pads

Place the car on a ramp and raise it to a comfortable working height. Remove the rear wheel corresponding to the pads to be replaced. Dismantle the drum using the appropriate spanner and remove the old pads from their housing. To do this, remove the spring that connects them at the bottom and unlock the central pins. At this point, disconnect the brake cable. Install the new pads by repeating the same operations in reverse order. The maintenance operation shown in the images is performed on a Nissan Micra.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Brake Pads on a Micra
How to Change the Brake Pads on a Micra
Nissan Micra (2002-2010 / K12) Changing the brake pads on a Micra? Remove the wheel and see how to disassemble it. Lift the car with a jack to the desired height, then remove the w…
How to Replace the Front Brake Pads on the Nissan Micra?
How to Replace the Front Brake Pads on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the front brake pads on the Nissan Micra, lift the car with a jack or ramp so that the corresponding wheel is off the ground. Then, unscre…
How to Replace the Brake Discs and Pads on a Nissan Micra
How to Replace the Brake Discs and Pads on a Nissan Micra
Nissan Micra (2002-2010 / K12) Remove the relevant wheel by unscrewing the bolts that secure it. Next, unscrew the two bolts located behind the disc to remove the brake pads. Then,…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos