Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the climate control unit from the console of the Nissan Qashqai J11 version

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Air conditioner

In this video, you will see how to remove the climate control unit from the console of the Nissan Qashqai J11 version. It is a snap-fit, with no screws to remove, which greatly simplifies the task; however, it is necessary to remove the part of the dashboard where the ignition button is located from the left side; this is also a snap-fit. It is advisable to insert your fingers into the area near the steering wheel, while using a plastic spatula on the other side. At the same time, the air conditioning unit will also come out, so just lift it from underneath and pull it out, being careful of the panel that was removed initially, which will rub against the unit. Now you can disconnect the electrical connectors, and you are done.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) In this brief guide, we will see the instructions that will allow us to disassemble and remove the central console, which includes the car radio and …
Nissan Qashqai (2014-2022 / J11) In today's tutorial video, you will learn how to remove the centre console from a Nissan Qashqai J11, second series, by following the instructions be…
Nissan Qashqai (2014-2022 / J11) In this video, we see the reason why the handbrake light on the Nissan Qashqai may start flashing. It is a known defect of the handbrake control unit…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos