Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Almera Versa
    4. : What does the "Service engine soon" light indicate in the Nissan Versa and how can it be removed?

Nissan Almera Versa - Video tutorial

Model: Nissan Almera Versa N17 - Years 2012-2019
Part: Checks and maintenance
Operation: What does the "Service engine soon" light indicate in the Nissan Versa and how can it be removed?

If the "Service engine soon" message appears on the instrument panel of our Nissan Versa, it means that it is time to service the vehicle as it has reached the designated interval. Once we have done this at our trusted workshop, we can manually remove the warning light by following the procedure shown in this tutorial. First, we turn on the instrument panel, then wait for 3 seconds and press the accelerator pedal five times consecutively. We then continue to hold down the same pedal, wait for 10 seconds, and as soon as the warning light disappears, we restart the vehicle.


Posted on 9 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos