Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2013 Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Service warning light

To reset the service light on the 2013 Nissan Juke, first turn on the vehicle's instrument cluster and wait about 3 seconds before pressing the accelerator pedal 5 times within 5 seconds. Then, release the accelerator pedal and wait 7 seconds. After this time, press and hold the pedal for 10 seconds and wait for the service light to start flashing. Remove your foot from the pedal while the light is flashing and restart the instrument cluster. Once the instrument cluster is on, the light should have turned off without any issues.

Updated on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Here are the steps to reset the service light for the regular maintenance oil change on the Nissan Juke. First, get into the vehicle and press and ho…
How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) The following video tutorial shows how to reset the service light on a Nissan Juke independently. If the light does not reset, a visit to the garage …
How to Reset the Service Light on a Nissan Juke?
How to Reset the Service Light on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this tutorial, you will see how to reset the service light on a Nissan Juke, a very simple and quick operation to perform only after completing al…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos