Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Diagram and location of the fuses in the Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D23 - Years 2014-2023
Part: Fuse box
Operation: Diagram and location of the fuses in the Nissan Navara

In this guide, we will see the diagram and positioning of the fuse boxes in the Nissan Navara, following these simple steps. First, we open the front door on the driver's side and start to locate the internal fuse box; we can find it at the bottom left, by lowering the small plastic cover, as shown in the video. At this point, we open the hood to locate the external fuse box, located near the brake fluid reservoir and near the air filter box; on the owner's manual, we will find the fuse diagram!


Posted on 11 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - What is the position of the fuse box on the Nissan Navara? Read Answer
    • Navara 2005-2015 - Where are the fuse boxes located on Nissan Navara D40? Read Answer
    • Navara 2005-2015 - Where is the towbar fuse of a Nissan Navara located? Read Answer
    • Navara 2005-2015 - Where is the Nissan Navara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos