Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure light on the Opel Adam?

Model: Vauxhall Adam MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

Video tutorial

To reset the tyre pressure light on the Opel Adam, inflate the tyres to the recommended pressure value, which can be found on the sticker attached to the driver's door pillar. Once the tyres are inflated, enter the cabin and press the MENU button located on the lever to the left of the steering wheel.

Then, scroll through the menu by turning the dial on the lever until you find the tyre pressure option. At this point, press and hold the SET/CLR button, also located on the lever, to turn off the light.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Opel Adam?
How to reset the tyre pressure warning light on the Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) To reset the tyre pressure warning light on the Opel Adam, inflate all the tyres to the correct pressure value: this value is indicated on the sticke…
How to Reset the Tyre Pressure Warning Light on an Opel Adam
How to Reset the Tyre Pressure Warning Light on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) To reset the orange low tyre pressure warning light, access the driver's seat and turn on the ignition. On the touch display located in the centre of…
How to Reset the Tyre Warning Light in an Opel Adam?
How to Reset the Tyre Warning Light in an Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) Refer to the video above to better understand which vehicle we will explain how to reset the tyre anomaly warning light. When the tyres are under-inf…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos