Do it yourself
Frequently asked questions about cars and motorcycles

How to Repair the Fuel Level Indicator of the Opel Adam?

Model: Vauxhall Adam MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

Video tutorial

To repair the fuel level indicator of the Opel Adam, loosen the screws that secure the tank to its housing, disconnecting all pipes and connectors attached to it. Once the tank is freed, proceed to remove the fuel pump located at its top. The float will be attached to the pump and must be completely removed to replace it with a new spare part.

After replacement, refit all components and check that the fuel indicator functions.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Vauxhall Adam (2013-2019 / MK 1) The small city car shown in the video is the Opel Adam, a vehicle for which we will delve into the maintenance of the fuel level sensor. In this exce…
Vauxhall Adam (2013-2019 / MK 1) If you want to replace the engine air filter of your Opel Adam by yourself, just follow the steps described below. First of all, you need to get a To…
Vauxhall Adam (2013-2019 / MK 1) In the following guide, we will explain step by step how you can locate the OBD port inside your Opel Adam in a few seconds. First of all, go inside …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos