Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper of an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

Does replacing the front bumper of an Opel Corsa seem difficult? Follow these steps. Lift the engine cover and secure it. Using a socket wrench or battery-powered screwdriver, unscrew the securing pins of the bumper located at the top as shown in the video.

Once this is done, unscrew the pins on the splash guards at the wheels, and finally remove the pins at the bottom of the bumper. Carefully pull the bumper away from the body of the vehicle.

To reassemble, position the bumper as shown in the video and tighten all screws around the splash guard and the perimeter. - Socket wrench with sockets - Battery-powered screwdriver with bits - Protective gloves - Various screwdrivers - Plastic levers.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of an Opel Corsa
How to Remove the Front Bumper of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before starting, open the bonnet of your Opel Corsa and fully turn the front wheels to the right. Begin by unscrewing and removing all the screws tha…
How to Remove the Front Bumper from an Opel Corsa
How to Remove the Front Bumper from an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To remove the front bumper from an Opel Corsa, open the bonnet to access the screws located at the top of the bumper. Once all these screws have been…
Removing the Front Bumper on an Opel Corsa
Removing the Front Bumper on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Do you want to remove the front bumper on an Opel Corsa? Open the front bonnet and see how to do it. Loosen the securing bolts of the bumper located …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos