Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Opel Corsa model E

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

The steps to replace the rear headlight bulb of the Opel Corsa model E are simple and quick to perform independently. The first step is to remove the side cover of the trunk in order to access the internal compartment of the headlight.

The second step is to unscrew the internal bolts of the headlight. The third step is to remove the headlight and disconnect it from its connector.

The fourth step is to open the dome light cover to proceed with the replacement of the bulb. The fifth step is to connect the connector to the headlight, close the dome light cover, and insert the headlight into its housing.

The sixth step is to screw the internal bolts of the headlight and close the side cover. Repeat the same steps to replace the right rear headlight bulb.


Posted on 11 December 2024 by ScegliAuto


Related tutorials

How do you replace the rear headlight bulb of the Opel Corsa?
How do you replace the rear headlight bulb of the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In order to replace the rear headlight bulb of the Opel Corsa, you need to open the hood so that you can access the side of the trunk where the bulb …
How to Replace the Rear Headlamp Bulb on an Opel Corsa E
How to Replace the Rear Headlamp Bulb on an Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) Today, learn how to replace the right rear headlamp bulb on an Opel Corsa model E. First, open the boot and remove the Torx screw located on the boot…
How to replace the rear headlight bulb of an Opel Corsa?
How to replace the rear headlight bulb of an Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the rear headlight bulb of an Opel Corsa, start by opening the rear hatch. Find the access panel inside the trunk, usually located behind …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos