Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate light bulb of the Opel Astra?

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: License plate light

In order to replace the license plate light bulb of the Opel Astra, you need to use an object to pry and detach the small light fixture above the license plate from inside its housing. Once the fixture is removed, you can disconnect the connector attached to it. The bulb inside can then be removed and reconnected to the connector. After reconnecting it, you can insert it back into its housing above the license plate to ensure everything is functioning correctly.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Number Plate Lights on the Opel Astra
Replacing the Number Plate Lights on the Opel Astra
Vauxhall Astra (2015-2022 / Astra K) Today’s guide will show you the procedure for removing and replacing the number plate lights on the Opel Astra. First, move to the rear of the vehicl…
How do you replace the license plate light of an Opel/Vauxhall Astra G?
How do you replace the license plate light of an Opel/Vauxhall Astra G?
Vauxhall Astra (1998-2006 / Astra G) In this video, we see how to change the license plate light of an Opel/Vauxhall Astra version G: the small light fixture is located on the right side…
What does error code 24 indicate on the Opel Astra?
What does error code 24 indicate on the Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) When the "error 24" code appears on the Opel Astra's instrument panel display, it means that the license plate light bulb needs to be replaced. To re…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos