Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the trunk opening button of the Opel Insignia

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Push button

Today's main instructions will allow us to dismantle and replace the rear tailgate opening button of the Opel Insignia. First, we open the rear tailgate (if it is locked, unlock the latch from the inside) and start by removing the inner plastic lining, unscrewing the fixing screws; then we unscrew the screws of the opening button, disconnecting its electrical connector, as shown in the video. At this point, we install the new button and check its operation before reassembling everything!

Posted on 18 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuel filter located and how to reach it on an Opel Insignia?
Where is the fuel filter located and how to reach it on an Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Good morning, today we are here to discover where the diesel filter of our Opel Insignia is located and understand how to reach it. The filter is loc…
Causes and Consequences of Low Oil Pressure on an Opel Insignia Engine
Causes and Consequences of Low Oil Pressure on an Opel Insignia Engine
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this video, you can see the consequences of low oil pressure on the engine of an Opel Insignia 2.0 with an A20DTH engine. A small rubber seal inst…
How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos