Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove and Replace the Timing Belt on Opel Astra

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Timing belt

How to remove and replace the timing belt on an Opel Astra: lift the car on a column lift (if necessary, remove the front right wheel and use a screwdriver to remove the clips of the splash guard). Remove the plastic cover of the tensioner, and using a spanner, loosen the tensioner pulley and slide the belt off its seat. Using a socket wrench, unscrew the tightening bolt of the tensioner pulley, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, refit the rivets with the splash guard and reattach the wheel with the tyre to the vehicle.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Astra (2004-2010 / Astra H) In this guide, follow the main steps to remove and replace the timing belt on the Opel Astra H 1.9 CDTI, following the instructions below. First, lif…
Vauxhall Astra (2004-2010 / Astra H) The procedure for replacing the timing belt of the Opel Astra is carried out by opening the hood, so that access is gained to the components located …
Vauxhall Astra (2004-2010 / Astra H) The procedure for replacing the timing belt on the Opel Astra is carried out by accessing the left side of the engine block: here the timing belt wil…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2015-2022 - After how many kilometers do I have to replace the timing chain on my Opel Astra? Read answer
    • Astra 2009-2016 - How many km do you replace the timing belt of the Opel Astra J? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos