Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on an Opel Astra

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Pump

See other generations:
Video tutorial

Replacing the water pump on an Opel Astra is a fairly simple task that can be done independently with a bit of patience. Start the disassembly procedure by lifting the car and removing the front right wheel.

Continue by removing the wheel arch liner and the undertray of the car. Using a belt tensioner spanner, remove the timing belt and the main pulley, as the pump is located behind it. Once the pulley is removed, open the radiator tap to drain the coolant.

Now, remove the five bolts securing the pump and proceed with the replacement.

Begin reassembling the various parts removed earlier and then lower the vehicle back to the ground. Conclude the operation by filling the reservoir with the new coolant.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on an Opel Astra
How to Replace the Water Pump on an Opel Astra
Vauxhall Astra (1991-1998 / Astra F) Replacing the water pump on an Opel Astra? Open and lift the front bonnet, then remove the engine soundproofing panel (the cover piece for the belts)…
How to Remove the Water Pump from an Opel Astra
How to Remove the Water Pump from an Opel Astra
Vauxhall Astra (2009-2016 / Astra J) Lift the bonnet and secure it. Use a screwdriver to remove the locking pins of the ventilation pipe, then take off the soundproofing panel from the e…
How to Replace the Water Pump on Opel Astra J 1.6 CDTi
How to Replace the Water Pump on Opel Astra J 1.6 CDTi
Vauxhall Astra (2009-2016 / Astra J) In this video tutorial, you will learn how to remove and replace the water pump on an Opel Astra J with a 1.6 CDTi engine. Start by removing the fron…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos