Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on an Opel Agila B

Model: Vauxhall Agila Agila B - Years 2008-2015
Part: Service warning light

Today we will see how to reset the service span on an Opel Agila B. So with the key inserted but the injection off, we press and hold down the two buttons on the speedometer. Now we turn on the injection of the vehicle without starting the engine. After doing this, we will see the "INsP" message appear on the display, then we continue to hold down the previous buttons until this message has blinked three times and then disappeared, leaving space for three dashes "---". This will indicate that the service has been reset. Finally, we restart the vehicle to verify the correct functioning of the procedure.

Posted on 5 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of an Opel Agila
How to Remove the Rear Light of an Opel Agila
Vauxhall Agila (2008-2015 / Agila B) Before you can start, exit the cabin of your Opel Agila and head to the rear of the vehicle. Begin by opening the boot. Next, unscrew and remove the …
Where to Find the OBD Port on an Opel Agila B
Where to Find the OBD Port on an Opel Agila B
Vauxhall Agila (2008-2015 / Agila B) If you are looking for the OBD port on your Opel Agila B but haven't found it yet, just follow these steps. First, get inside the vehicle and reach t…
How to Reset the Service Light on the Opel Agila "b" (Alternative Method)
How to Reset the Service Light on the Opel Agila "b" (Alternative Method)
Vauxhall Agila (2008-2015 / Agila B) An alternative method to reset the service light on the Opel Agila "b". First, use the remote to lock and unlock the doors (it doesn't matter if they…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos