Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the airbag of an Opel Insignia MK1

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Airbag

See other generations:
Video tutorial

In this video, we will see how to disassemble the airbag of the Opel Insigna MK1: first, we need to rotate the steering wheel so that the wheels are completely turned. In this way, we will see that there are two small holes on the back of the steering wheel: we will first enter one of them with a small screwdriver, thus opening the retaining spring.

We rotate the steering wheel in the opposite direction and in this way we will find the same hole on the other side. We repeat the operation so that we can also open the retaining spring from the opposite side.

At this point, we can easily remove the airbag by disconnecting the electrical connectors that still hold it to the steering wheel. If we also want to remove the steering wheel, we will need to get a large key, the size of the central screw, in order to unscrew it.


Posted on 10 July 2025 by ScegliAuto


Related tutorials

Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To remove the steering wheel airbag from the Opel Insignia, start the engine so that the steering wheel can be turned upside down. Once the steering …
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this tutorial, you can see how to deactivate the passenger airbag in the Opel Insignia, a very simple and quick operation that must be done after …
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) This video shows where the airbag control module is located in the Opel Insignia, useful if you need to replace it due to a fault. As shown, the modu…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos