Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the passenger airbag of the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Airbag

See other generations:
Video tutorial

Today we will explain how to deactivate the passenger airbag of the Opel Mokka produced from 2016 to today. To perform this simple operation, we need to use the key for starting the vehicle.

Get into the car and insert the key into the side lock, move the lever to off to deactivate the system. On the instrument panel, when we start the vehicle, a message will appear to indicate that the airbag has been deactivated.

To activate the airbag, we must follow the same steps by moving the lever to on. Again, with the ignition of the instrument panel, a message will be displayed to indicate that the airbag is active.


Posted on 11 July 2025 by ScegliAuto


Related tutorials

Deactivate the Passenger Airbag on the Opel Mokka A
Deactivate the Passenger Airbag on the Opel Mokka A
Vauxhall Mokka (2012-2019 / Mokka A) If you have installed a child seat on the front passenger seat, you must deactivate the corresponding airbag because if it deploys, it could cause in…
How to disassemble the steering wheel airbag of the 2016 Opel Mokka
How to disassemble the steering wheel airbag of the 2016 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today we will explain how to disassemble the steering wheel airbag of the 2016 Opel Mokka. To perform this operation, we need to use a flat-head scre…
How to remove the steering wheel airbag of the 2017 Opel Mokka
How to remove the steering wheel airbag of the 2017 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) The following video tutorial shows us the steps to remove the steering wheel airbag on a 2017 Opel Mokka car. To remove the airbag, we need to insert…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos