Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel airbag of the 2016 Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Airbag

See other generations:
Video tutorial

Today we will explain how to disassemble the steering wheel airbag of the 2016 Opel Mokka. To perform this operation, we need to use a flat-head screwdriver.

Disconnect the car battery to prevent the system from activating. Insert the screwdriver into the lower hole of the steering wheel, move the internal lever to activate the clip and remove the central body of the airbag.

Disconnect the airbag connector to remove the central body. Once the airbag is removed, it will be possible to remove the vehicle's steering wheel.

To assemble the airbag, we must follow the procedure in reverse.


Posted on 11 July 2025 by ScegliAuto


Related tutorials

How to remove the steering wheel airbag of the 2017 Opel Mokka
How to remove the steering wheel airbag of the 2017 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) The following video tutorial shows us the steps to remove the steering wheel airbag on a 2017 Opel Mokka car. To remove the airbag, we need to insert…
How to deactivate the passenger airbag of the Opel Mokka
How to deactivate the passenger airbag of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today we will explain how to deactivate the passenger airbag of the Opel Mokka produced from 2016 to today. To perform this simple operation, we need…
Deactivate the Passenger Airbag on the Opel Mokka A
Deactivate the Passenger Airbag on the Opel Mokka A
Vauxhall Mokka (2012-2019 / Mokka A) If you have installed a child seat on the front passenger seat, you must deactivate the corresponding airbag because if it deploys, it could cause in…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos