Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure anomaly in the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part:

The tire pressure warning light reset in the Opel Mokka is quite simple and does not require technical experience or the use of special equipment, in fact we will see it. This light comes on because there is a problem, such as a puncture, cut, and so on, reported by the sensors shown in the video, and this issue must be resolved and then the warning must be reset. Ok, but how do you perform this cancellation? Turn on the instrument panel, press the Set button on the left lever of the steering wheel, scroll with the same lever's wheel between Settings and choose Tires: Here we will use the Set button again and proceed with the aforementioned reset.

Posted on 20 July 2025 by ScegliAuto

Video tutorial

Related tutorials

The tire inflation pressure anomaly in the 2015 Opel Mokka, how do you reset it?
The tire inflation pressure anomaly in the 2015 Opel Mokka, how do you reset it?
Vauxhall Mokka (2012-2019 / Mokka A) There is a specific tire pressure warning light dedicated to the low inflation pressure of the tires, present on the instrument panel. If these value…
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will provide instructions to allow you to recalibrate the tyre pressure sensors on the Opel Mokka. Before resetting the TPMS …
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on the Opel Mokka, open the driver's door and check the recommended inflation pressure values on the sticker…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos