Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part:

In the above attached video, we will see how to reset the tire pressure anomaly warning light on the Opel Mokka. If the pressure is insufficient, the warning light will come on, so we need to understand what is causing it, such as a flat tire, faulty control sensor, and more. To cancel the warning, turn on the instrument panel, press the Set button on the left lever of the steering wheel, select the tire option with the wheel next to it, and finally press Set again to start the Reset process.

Posted on 29 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the 2021 Opel Mokka
How to reset the TPMS light on the 2021 Opel Mokka
Vauxhall Mokka (2020-2026 / Mokka B) The TPMS light comes on in a 2021 Opel Mokka when it is necessary to check the tire pressure. After adjusting the tire pressure, following the guidel…
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
How to Reset the Tyre Pressure Warning Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on the Opel Mokka, open the driver's door and check the recommended inflation pressure values on the sticker…
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
How to Recalibrate the Tyre Pressure Sensors on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will provide instructions to allow you to recalibrate the tyre pressure sensors on the Opel Mokka. Before resetting the TPMS …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos