Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil change reset on an Opel Corsa

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Service warning light

In this very useful tutorial today, we will see how to reset the remaining life of the engine oil on an Opel Corsa E, model produced from 2014 to 2019. Let's start by turning on the ignition of our car without starting the engine, then we press the "MENU" button to open the vehicle menu on the tachometer display, then scroll through the various menu items until we reach the screen showing the remaining life of the engine oil. Once we have done this, we press the "SET/CLR" button to request the reset and finally confirm the procedure to complete the job.

Posted on 12 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Oil change reset on an Opel Corsa C
Oil change reset on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In today's video, we will see how to reset the service on an Opel Corsa C, a model produced from 2000 to 2006. Let's start by inserting the ignition …
Resetting the Oil Change Light on an Opel Corsa D
Resetting the Oil Change Light on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Today, let's see how to reset the oil change light on an Opel Corsa D 1.2 petrol. Start by inserting the ignition key and pressing the speedometer bu…
How to Reset the Engine Oil Change Light on the Opel Corsa
How to Reset the Engine Oil Change Light on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Today, you will learn how to reset the engine oil change light on the Opel Corsa in a few simple steps. First, get in the car and turn on the ignitio…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos