Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the language on the Opel Vivaro's instrumentation

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Checks and maintenance

In this guide we will see the instructions that will allow us to change the language on the instrumentation of the Opel Vivaro. In order to change the language on this type of vehicle, it is necessary to use a specific programming tool (in this case the Autel Maxilm); we connect the tool to the OBD socket of the vehicle and turn on the instrument panel to allow dialogue with the control unit. At this point, we select the brand and model of the car, then go to the appropriate section to change the language on the instrument panel and on the central display.

Posted on 27 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the System Language on the Opel Vivaro B
How to Change the System Language on the Opel Vivaro B
Vauxhall Vivaro (2014-2019 / MK 2) To change the system language on your Opel Vivaro B (2014-2019), follow these steps. First, enter the cabin and turn on the instrument panel. Next, f…
How to change the system language in the Opel Vivaro van?
How to change the system language in the Opel Vivaro van?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In this tutorial, we can see how to change the system language in the Opel Vivaro van, an extremely simple and fast operation, to be carried out for …
How to Reset the Service Light on the Opel Vivaro?
How to Reset the Service Light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To reset the Service light on the Opel Vivaro, press and hold the CHECK button located in the centre of the instrument cluster while it is off. Conti…

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where is the inertia switch of the Opel Vivaro 2.5 cdtt? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos