Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the high beams of the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Today we will see how to activate and deactivate the high beams on an Opel Mokka vehicle. To perform this operation, we need to start the vehicle and rotate the knob located on the left side of the dashboard to activate the high beams.

To increase the brightness of the high beams, we need to rotate the knob located on the left lever of the steering wheel. Also, to use the high beams as a warning signal for other drivers, it is necessary to move the lever.

To deactivate the high beams, we need to return the knob to off and turn off the vehicle if necessary. Otherwise, we can continue driving in peace.


Posted on 30 August 2025 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on an Opel Mokka
How to Reset the "Service" Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, sit in the driver's seat of your Opel Mokka. Start by activating the instrument cluster by turning the key to position one. Next, p…
How to Reset the Tyre Pressure Light on the Opel Mokka?
How to Reset the Tyre Pressure Light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) Resetting the tyre pressure light on the Opel Mokka, as shown in this tutorial, is an extremely simple and quick operation. For this, you will need t…
How to Remove the Petrol Filter on an Opel Mokka
How to Remove the Petrol Filter on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you start, engage first gear and activate the handbrake on your Opel Mokka. Begin by lifting the rear of the vehicle. This will give you acces…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos