Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the pump and reservoir of the windshield washer fluid of the Opel Corsa

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

In this short guide, we will see the instructions that will allow us to disassemble and replace the washer pump and tank of the Opel Corsa. First, we remove the right front wheel arch, removing if necessary also the front wheel; then we disconnect the washer pump from the tank, leveraging, as shown in the video.

Once the fluid inside the tank has been removed, it will be possible to remove it by unscrewing the fixing screws and replacing it with the new one; then we reassemble the pump and the front wheel arch, subsequently topping up with washer fluid.


Posted on 25 September 2025 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Pump on the Opel Corsa
How to Replace the Windscreen Washer Pump on the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) In this video tutorial, you will learn how to remove and replace the windscreen washer pump on the Opel Corsa, following the instructions provided be…
How to Replace the Windscreen Washer Jets on an Opel Corsa?
How to Replace the Windscreen Washer Jets on an Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the windscreen washer jets on an Opel Corsa, open the bonnet to remove the seal located at the base of the windscreen. Underneath, you wil…
Disassembly and replacement of the fuel pump of the Opel Corsa
Disassembly and replacement of the fuel pump of the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Today we will discover the instructions that will allow us to disassemble and replace the fuel pump of the Opel Corsa. First, we access the rear part…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos