Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn on the low beams of the front headlights of the Opel Karl

Model: Vauxhall Karl MK 1 - Years 2015-2019

Today we will see how to turn on and off the low beam and high beam lights on an Opel Karl vehicle. To turn on the parking lights, we need to turn on the instrument panel and rotate the knob on the left side of the dashboard. By turning the knob to ON, we will activate the low beam lights, while moving it to OFF will turn them off. To activate the high beam lights, we need to rotate the knob on the left lever of the steering wheel outward, and rotate it inward to deactivate them. If the lights do not turn on, it will be necessary to check the fuse or the bulb.

Posted on 10 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Opel Karl?
Where are the fuses located in the Opel Karl?
Vauxhall Karl (2015-2019 / MK 1) The fuses in the Opel Karl are contained within dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. The first is …
How do you reset the tire pressure warning light on the Opel Karl?
How do you reset the tire pressure warning light on the Opel Karl?
Vauxhall Karl (2015-2019 / MK 1) In order to reset the tire pressure warning light on the Opel Karl, you need to inflate the tires to the recommended pressure value: this value is in…
How to Reset the "Service" Light on an Opel Karl
How to Reset the "Service" Light on an Opel Karl
Vauxhall Karl (2015-2019 / MK 1) Before you start, sit in the driver's seat of your Opel Karl. Turn the key in the ignition switch to position one to activate the instrument panel. N…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos