Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to DIY Reset the Service Light on an Opel Kadett

Model: Vauxhall Kadet Kadet E - Years 1984-1993
Part: Service warning light

On the Opel Kadett, the service light reset occurs directly from the instrument cluster, without external tools. With the vehicle stationary, turn the ignition ON and use the command displayed in the images to access the maintenance section. Hold the button until the warning resets or confirm when the request appears on the display. After finishing, turn off and restart the ignition to verify that the indicator no longer appears and that the counter is reset. If the procedure is not accepted on the first attempt, repeat the sequence ensuring the engine is off and the doors are closed.

Posted on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Cylinder Head Gasket and Camshaft Oil Seal Replacement
Cylinder Head Gasket and Camshaft Oil Seal Replacement
Vauxhall Kadet (1984-1993 / Kadet E) Before inserting the new camshaft, lubricate it thoroughly and then attach the external mounting plates. Next, insert the oil seal after lubricating …
Replacing the Cylinder Head Gasket
Replacing the Cylinder Head Gasket
Vauxhall Kadet (1984-1993 / Kadet E) When skimming the cylinder head, it is always advisable to check its flatness using a straight edge and a feeler gauge; the same check should be perf…
Removal of Engine Valve Cover Gasket
Removal of Engine Valve Cover Gasket
Vauxhall Kadet (1984-1993 / Kadet E) The valve cover is located on top of the engine and is connected by a rubber or cork gasket, which prevents oil leaks. This guide shows how to remove…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos