Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Intake Manifold Gasket Replacement

Model: Vauxhall Kadet Kadet E - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Part: Engine

Video tutorial

Before applying the new gasket to the intake manifold, it is crucial to clean the surfaces on both the cylinder head and manifold sides: remove any dirt and deposits that could compromise the adhesion and sealing of the gasket, affecting the engine's performance and fuel consumption.

Once the cleaning phase is complete, position the new gasket aligning it with the dowel pins corresponding to the intake ports of the cylinder head, fit the intake manifold and tighten the fixing nuts with a torque wrench.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Vauxhall Kadet (1984-1993 / Kadet E) Before applying the new gasket to the exhaust manifold, it is essential to thoroughly clean the gasket seating, both on the cylinder head side and th…
Replacing the Valve Stem Seal
Replacing the Valve Stem Seal
Vauxhall Kadet (1984-1993 / Kadet E) Replacing the valve stem seal is a challenging task that requires some mechanical knowledge. It is important to know that each seal, whether right or…
Replacing the Cylinder Head Gasket
Replacing the Cylinder Head Gasket
Vauxhall Kadet (1984-1993 / Kadet E) When skimming the cylinder head, it is always advisable to check its flatness using a straight edge and a feeler gauge; the same check should be perf…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos