Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

How to replace the key fob battery of an Opel Insignia? This video details the process. Take your key fob and press the button to release the metal key. Once the key is extracted, use a lever to separate the two covers (as shown in the video).

Remove the flat battery from the key fob housing (after separating the two halves of the covers), take a new one of the same size and voltage. Refit the plastic battery holder into the key fob cover, then insert the metal key back into the cover.

Check the proper functioning of the key fob.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Opel Insignia?
How to Replace the Remote Battery of the Opel Insignia?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To replace the remote battery of the Opel Insignia, press the button located on the back to extract the key from the top. Once this has been removed,…
How to Replace the Key Battery on the Opel Insignia B
How to Replace the Key Battery on the Opel Insignia B
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To change the button battery in the smart key of your Opel Insignia B (2017-2023), it only takes a few seconds. Just read the following guide careful…
How to Replace the Key Fob Battery on an Opel Insignia
How to Replace the Key Fob Battery on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) These brief and simple steps will allow you to disassemble and replace the battery of the key fob for the Opel Insignia. First, take your key fob and…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos