Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Remove the fuel pump on Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Fuel pump
Operation: Remove the fuel pump on Opel Corsa

The fuel pump of the Opel Corsa no longer works and we want to remove it? Let's see how to do it. We raise the front hood, disconnect the battery cables. We disassemble the seats of the rear seats of the car. Using a socket wrench, unscrew the tightening screws placed around the metal cap; let's remove it from its seat, cover the perimeter with absorbent paper to stop liquid leaks. Unscrew the fuel pump clamp, disconnect the power supply terminals and the liquid circulation pipes. We extract the fuel pump from inside the tank. We mount the new fuel pump and connect the clamps and hoses.


Posted on 1 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Corsa 2000-2006 - What is the position of the fuel pump on the Opel Corsa C? Read Answer
    • Corsa 2000-2006 - Where is the fuel pump relay located in the Opel Corsa utility 1.4? Read Answer
    • Corsa 1993-2000 - Where is the fuel pump relay located on Opel Corsa? Read Answer
    • Corsa 2019-2026 - Location of the fuel pump on the Opel Corsa? Read Answer
    • Corsa 2006-2014 - Where is the fuel pump located in the Opel Corsa? Read Answer
    • Corsa 2006-2014 - How much does the Opel Corsa 1200 fuel pump cost? Read Answer
    • Corsa 2019-2026 - How much does the Opel Corsa 1.2 petrol pump cost? Read Answer
    • Corsa 2014-2019 - How much does the Opel Corsa petrol pump cost? Read Answer
    • Corsa 2000-2006 - How to replace the fuel pump in the Opel Corsa? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos