Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Brake Pad Replacement for Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

See other generations:
Video tutorial

Today, you will learn how to remove and replace the brake pads on an Opel Meriva. First, lift the vehicle and remove the wheel bolts to take off the wheel.

Next, remove the bolts from the brake caliper and insert a lever inside to retract the piston. Then, remove the brake caliper.

At this point, extract the old pads and replace them with new, high-quality ones. Retract the hydraulic piston as much as possible and refit the brake caliper, finally tightening the bolts.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on an Opel Meriva
How to Replace the Rear Brake Pads on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before you can start, lift the rear of your Opel Meriva. Begin by unscrewing and removing the bolts securing the rear wheel, then remove the wheel it…
Replacing Brake Pads and Discs on Opel Meriva
Replacing Brake Pads and Discs on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In today's video tutorial, you will learn how to remove and replace the brake pads and discs on a first generation Opel Meriva. First, lift the vehic…
How to Replace the Front Brake Pads on an Opel Meriva A
How to Replace the Front Brake Pads on an Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) This guide shows how to replace the front brake pads on an Opel Meriva A. The first step is to open the brake fluid reservoir and remove the front wh…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos