Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Radiator from Opel Corsa C 1.2 16 Valve

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Radiator

In this video tutorial, follow the instructions to remove the radiator from an Opel Corsa C 1.2 16 valve. First, open the bonnet and unscrew the upper fixing screws of the bumper; then unscrew the screws found on both sides of the wings to detach the front bumper. After removing the bumper, unscrew the bolts securing the radiator to the chassis; remove the upper hose and disconnect the radiator. Finally, disconnect the radiator pipes, allowing all the fluid to drain, and remove the radiator itself, as shown in the video!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Coolant in the Opel Corsa D 1.4
How to Replace the Engine Coolant in the Opel Corsa D 1.4
Vauxhall Corsa (2006-2014 / Corsa D) This guide shows how to replace the engine coolant in the Opel Corsa D 1.4. The amount of coolant required for this engine is approximately 6 litres,…
How do you replace the EGR valve of the Opel Corsa?
How do you replace the EGR valve of the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) In order to replace the EGR valve of the Opel Corsa, you will need to open the hood to access the components inside the engine compartment: here you …
How to Remove the Radiator on an Opel Corsa B
How to Remove the Radiator on an Opel Corsa B
Vauxhall Corsa (1993-2000 / Corsa B) In this video, discover how to remove and replace the cooling radiator on an Opel Corsa B by following the instructions below. First, open the bonnet…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos