Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Centre Console

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Center console tunnel

See other generations:
Video tutorial

First, remove the plastic cover located just below the ashtray, in front of the gear lever; then open the ashtray lid and unscrew the fixing screws to extract it, disconnecting the power connector for the cigarette lighter. Next, remove the glove compartment shelf located just below the climate control buttons; use the appropriate extraction keys to remove the car radio; extract the hazard light switch and unscrew the four fixing screws of the centre console support: at this point, it is possible to remove it by disconnecting the display connectors and the control cables for the climate control knobs.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Guide to Removing the Rear Seats of the Opel Astra
Guide to Removing the Rear Seats of the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Today's guide will show you the procedure for removing and replacing the rear seats of the Opel Astra. First, open the rear doors and start pulling t…
Instructions for Removing Driver's Airbag
Instructions for Removing Driver's Airbag
Vauxhall Astra (1998-2006 / Astra G) Before proceeding with the removal of the driver's side airbag (integrated in the steering wheel), disconnect the battery to prevent the warning ligh…
Instructions for Removing the Starter Motor
Instructions for Removing the Starter Motor
Vauxhall Astra (1998-2006 / Astra G) Before starting to remove the starter motor, it is advisable to disconnect the battery; to easily access the starter motor, which is connected to the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos