Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Astra
  6. : How to replace the wiper motor on an Opel Astra?

Vauxhall Astra - Video tutorial

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Windscreen wipers
Operation: How to replace the wiper motor on an Opel Astra?

Before we can begin, we will have to go and open the front hood of our Opel Astra. So let's start by disconnecting the main electric plug of the wiper motor, and then removing the upper gasket. Next, we will have to go and disassemble the wipers and the top cover, unscrewing the bolts and fixing screws, and we will have reached the motor block. We then proceed by unscrewing and removing the fixing bolts of the support plate, and then extracting it from its seat. At this point, we will have to unscrew and remove the bolts that secure the motor to the plate, and then remove it, and we will have finished the disassembly. To fit the new motor, all we have to do is repeat these instructions in reverse, and the replacement will be completed.


Posted on 24 January 2024 by ScegliAuto



How to replace the windshield wiper motor of the Opel Astra.
Vauxhall Astra (2004-2010 / Astra H) The steps outlined in this guide will show us how to disassemble and replace the windshield wiper motor of the Opel Astra, following the instructions
How to replace the front wiper motor on an Opel Astra
Vauxhall Astra (1998-2006 / Astra G) Before we can start, we'll need to open the front hood. So let's start by disconnecting the motor plug, located near the water tank. After that we wi
How to replace the rear wiper blade of an Opel Astra J.
Vauxhall Astra (2009-2016 / Astra J) Let's see how to quickly replace the rear wiper blade of the Opel Astra J: we need to take the wiper blade and pull it all the way up until it clicks

    Frequently Asked Questions

    • Astra 2009-2016 - Where is the fuse of the Opel Astra J windscreen washer located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos