Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil in an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Before you start, open the front bonnet of your Opel Mokka. Begin by unscrewing and removing the top cap where you add the engine oil. Next, lift the front of the vehicle.

Once done, you will reach the lower oil drain nut, which you need to unscrew and remove. When the engine oil has completely drained, re-screw the lower nut, then lower the vehicle.

At this point, add new oil to the engine through the top hole, then re-screw the corresponding cap, and the replacement is complete.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Where is the Engine Oil Filter on the Opel Mokka?
Where is the Engine Oil Filter on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) When changing the engine oil on your first-generation Opel Mokka, it is advisable to also replace the appropriate filter to avoid unpleasant issues. …
How to Replace Engine Oil and Oil Filter on the Opel Mokka 1.6
How to Replace Engine Oil and Oil Filter on the Opel Mokka 1.6
Vauxhall Mokka (2012-2019 / Mokka A) Today's video will show you the procedure for replacing the engine oil and oil filter while performing the regular maintenance service on the Opel Mo…
Changing Engine Oil and Oil Filter on Opel Mokka 1.6 CDTI
Changing Engine Oil and Oil Filter on Opel Mokka 1.6 CDTI
Vauxhall Mokka (2012-2019 / Mokka A) In this guide, we will see how to change the engine oil and oil filter on an Opel Mokka 1.6 CDTI. First, lift the vehicle and using a socket wrench, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos