Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads on an Opel Meriva 1.4

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Brake pads

See other generations:
Video tutorial

Want to remove the front brake pads on your Meriva? Here’s how to replace the brake pads. Lift the car on a column lift to the desired height, then remove the wheel using a telescopic wrench.

Undo the caliper locking pin and remove the caliper from the wheel hub. Use a screwdriver to detach the pads from the caliper, then remove the caliper from the brake disc. Install the new pads onto the caliper, then refit the caliper onto its disc.

Finally, test the brake operation.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads of Your Opel Meriva
How to Replace the Front Brake Pads of Your Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before starting, engage the handbrake and put the car in first gear. Begin by lifting the front of your Opel Meriva. Once done, unscrew and remove th…
How to Replace the Front Brake Pads on an Opel Meriva A
How to Replace the Front Brake Pads on an Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) This guide shows how to replace the front brake pads on an Opel Meriva A. The first step is to open the brake fluid reservoir and remove the front wh…
How to Replace the Rear Brake Pads on an Opel Meriva
How to Replace the Rear Brake Pads on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before you can start, lift the rear of your Opel Meriva. Begin by unscrewing and removing the bolts securing the rear wheel, then remove the wheel it…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos