Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the coolant reservoir on Una Opel Astra

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: Checks and maintenance

How to remove the coolant reservoir of an Opel Astra? Let's see the disassembly of the tray. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. We locate the liquid tank inside the engine compartment, detach the tube from under the tank, empty the tank from the liquid present, with a socket wrench or screwdriver unscrew the tightening pins of the same, disconnect the tank circulation pipes. We assemble a new tray with attached pipes or we assemble the old one after a thorough cleaning.

Posted on 23 June 2021 by ScegliAuto

Video tutorial

Related tutorials

Water sensor replacement on Opel Astra
Water sensor replacement on Opel Astra
Vauxhall Astra (2009-2016 / Astra J) How do you disassemble the coolant sensor? We disassemble the Opel Astra coolant reservoir. We raise the front hood to access the coolant reservoir. …
ABS replacement on Opel Astra
ABS replacement on Opel Astra
Vauxhall Astra (2004-2010 / Astra H) How to disassemble the ABS on an Opel Astra? Let's see the disassembly of the piece placed inside the engine compartment. Lift the front hood, discon…
Replacement of the water temperature sensor of the Opel Astra 1.6 8V
Replacement of the water temperature sensor of the Opel Astra 1.6 8V
Vauxhall Astra (1998-2006 / Astra G) In this short and simple guide we will see the instructions that will allow us to disassemble and replace the coolant temperature sensor of the Opel …

Other guides you may be interested in

How to Remove the Steering Wheel Airbag on a Dodge Journey

How to remove the steering wheel airbag on a Dodge Journey? Follow these steps. Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps from the back of the steering wheel, then unscrew the airbag retaining bolts with a socket wrench. Once the driver’s airbag is released, disconnect the power connectors and remove the airbag from the steering wheel. For reinstallation: connect the power connectors, then press the airbag back onto the steering wheel while simultaneously tightening the rear bolts.

Watch the video!


by ScegliAuto

More videos