Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Controls on an Opel Vectra C

Model: Vauxhall Vectra Vectra C, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Push button

See other generations:
This video is currently unavailable

Today, you will see in this short and simple video the steps necessary to remove and replace the controls or buttons on the steering wheel of the Opel Vectra C. First, open the bonnet and disconnect the battery; then get inside the vehicle and remove the airbag by inserting something sharp into the rear hole and pushing, as shown in the video.

At this point, disconnect the airbag's electrical connector to remove it completely; now unscrew the three screws with a Torx T20 screwdriver to remove the controls!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag on Opel Vectra
How to Remove the Steering Wheel Airbag on Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps at the back of the steerin…
How to Replace the Instrument Cluster Bulb in the Opel Vectra
How to Replace the Instrument Cluster Bulb in the Opel Vectra
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) Below are the instructions that will allow you to remove and replace the bulbs in the instrument cluster of the Opel Vectra. First, get inside the ve…
Where are the Fuse Boxes in the Opel Vectra?
Where are the Fuse Boxes in the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Inside the Opel Vectra model C, there are three fuse boxes. The first fuse box is located under the front bonnet, specifically next to the battery. T…

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos