Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on Opel Vectra

Model: Vauxhall Vectra Vectra C, MK 3 - Years 2002-2008
Part: Airbag

Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps at the back of the steering wheel, then unscrew the airbag retaining screws with a screwdriver. Once the driver's side airbag is released, disconnect the power connectors and remove the airbag from the steering wheel. For reinstallation, connect the power connectors, then press the airbag onto the steering wheel while simultaneously tightening the rear screws with the screwdriver.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel Controls on an Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Today, you will see in this short and simple video the steps necessary to remove and replace the controls or buttons on the steering wheel of the Ope…
How to Replace the Instrument Cluster Bulb in the Opel Vectra
How to Replace the Instrument Cluster Bulb in the Opel Vectra
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) Below are the instructions that will allow you to remove and replace the bulbs in the instrument cluster of the Opel Vectra. First, get inside the ve…
How to Remove the Fuel Pump on an Opel Vectra C
How to Remove the Fuel Pump on an Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) This simple guide shows you how to remove the low-pressure fuel pump or the fuel sender unit on an Opel Vectra C, second series. First, open the rear…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos